| Pneumatics Kit | | The Pneumatics Kit is designed to be used by a group of 2 to 3 students, and provides a simple and economical resource for teaching the basic principles of pneumatics. It contains: a fully-working model compressor, 2 double-acting cylinders, 2 valves, pipe and connectors, and a range of construction components. The Pneumatics Focus Kit book, which is available separately, provides a course of investigation activities and design scenarios based on a series of simple models built from the kit. It covers: understanding the compressor, understanding pneumatic cylinders and valves, using pneumatic cylinders as a source of linear movement and force, and combining them with mechanisms such as levers and linkages, to change movement and force. Pneumatics Focus Kit Book
L30/057 | 
ECON 2525
| 
The Fischertechnik model compressor replicates a real compressor, using an electric motor driven pump to compress air into a receiver tank.
The system works at a safe low pressure but provides sufficient force to operate working models containing either one or two cylinders. The model compressor requires a 6V power supply. The Fischertechnik Power Supply is recommended. | 
The flow of compressed air is controlled in and out of the cylinders by simple 3-position valves. The transparent cylinders allow students to see the movement of the piston.
Pipes are attached to components by easy push-fit connectors. | | Pneumatics Supplementary Kit | | This kit contains the model compressor, 2 double-acting cylinders, 2 valves, pipe and connectors only. It is designed to be used in conjunction with a Mechanisms Kit, which will provide the construction components needed for building the models shown in the Pneumatics Focus Kit book. | 
ECON 2526 | | Profi Pneumatics II | | Item No. 77 791 The Profi Pneumatics II provides playful learning of the
basics of this “airy” technology and shows, using numerous
application examples, the way that pneumatic valves and
cylinders work in connection with a compressor and an
air cell. It contains four double-acting pneumatic cylinders, three 4/3-way hand valves and one electrically operated
compressor with air cell. > incl. the activity booklet:
Pneumatics - Produce Movement with Compressed Air
> incl. compressor with mini motor, switch, battery holder.
> 350 components > 8 models |  | 
(C) Compressor: driven by the minimotor, the compressor cylinder pumps air into the blue air cell (P) Pneumatic cylinder: the air is fed into this through hoses (V) Valve: when you open the valve, air flows into the cylinder and makes the piston move. (O) This lifts the excavator arm or the pipe is grasped and lifted | 
Instructional Book
Booklet
Worksheets
recommended storage:
4 x Items No. 94828
| | Pneumatics Robot | | Machining Center, sorting system, pneumatics gripping device and door opener. The machines powered by compressed air can be programmed and controlled with the ROBO interface and the software, ROBO Pro, though the PC. The values open and close electromagnetically. Contains CD with the corresponding examples.
>incl. 1 mini motor, 1 compressor with mini motor, 1 sensing device, 4 pneumatics cylinders, three 3/2-magnetic, 1 light barrier.
>350 components >4 models
>Requires*:ROBO interface + software ROBO Pro +Energy Set or Accu Set |  |
|
